Avaya 3050-VM, User Manual, Page: 114 / 274

When using HTTP or TFTP to retrieve a CRL, you do not need to provide a
distinguished name for binding and authentication.
>> Automatic CRL#
authDN
Current value:
""
Enter DN:
3. Set the password used for binding and authenticating the initiated LDAP session
on the specified LDAP server.
Check your LDAP server documentation for details on binding, authentication, and
access control.
When using HTTP or TFTP to retrieve a CRL, you don't need to provide a password
for binding and authentication.
>> Automatic CRL#
passwd
Current value:
""
Enter password:
4. Set the time interval for retrieving CRLs from the resource you have specified using
the
url
command.
If you want to specify a time interval in minutes, hours or days, enter an integer
directly followed by the letter m, h, or d.
The default interval is 1 day (
1d
). The shortest time interval allowed is 601 seconds
(10 minutes and 1 second).
>> Automatic CRL#
interval
Current value: 1d
Enter refresh interval:
5. Specify which CA certificates are valid signers of the certificate revocation lists you
retrieve.
To get an overview over all available certificates, enter the
/info/certs
command.
When specifying more than one certificate, use commas to separate the
corresponding index numbers. Example: 1,2,5
To clear all specified CA certificates, press
ENTER
when asked to enter certificate
numbers, then answer yes to the question if you want to clear the list.
Certificates and Client Authentication
114 User Guide April 2013
Comments? infodev@avaya.com