Avaya 3050-VM User Manual Download Page 163

Page: 163 / 274

Appendix B: The SNMP Agent

There is one SNMP agent on each Avaya VPN Gateway (AVG), and the agent listens to the IP address

of that particular device. On the VPN Gateway that currently holds the cluster's Management IP address

(MIP), the SNMP agent also listens to the MIP.

The SNMP agent supports SNMP version 1, version 2c and version 3. Notification targets (the SNMP

managers receiving trap messages sent by the agent) can be configured to use either SNMP v1, v2c and

v3 (with the default being SNMP v2c). Users may specify any number of notification targets on the VPN

Gateway.

For more information about the commands used to configure the SNMP agent in a cluster, see the "

SNMP

Management Configuration

" section under

Configuration Menu>System Configuration

in the

Avaya

Command Reference

For detailed information about the MIB (Management Information Base) definitions that are currently

implemented for the SNMP agent, do one of the following:

• Go to

http://www.avaya.com

. In the left pane, select Downloads. In the Product dialog box, type VPN

Gateway 3050 or VPN Gateway 3070. Select the release number you want from the pull-down list,

and then select the download package you want. Click the Downloads tab. Search on the resulting

page for the mib file you want.

• Connect to the Browser-Based Management Interface (BBI) In the System tree view, expand

Administration

and

SNMP

. Finally select the

MIBs

form.

The file ALTEON-SSL-CAP.mib contains an AGENT-CAPABILITIES statement, which formally specifies

which MIBs are implemented.

Supported MIBs

The VPN Gateway supports the following MIBs:

• SNMPv2-MIB
• SNMP-MPD-MIB
• SNMP-FRAMEWORK-MIB
• SNMP-TARGET-MIB
• SNMP-NOTIFICATION-MIB
• SNMP-VIEW-BASED-ACM-MIB
• SNMP-USER-BASED-SM-MIB
• SYNOPTICS-ROOT-MIB

User Guide

April 2013 163

Summary of Contents for 3050-VM



















































































































































































































































































Search results

Summary of Contents for 3050-VM

Reviews:

Avaya 3050-VM, User Manual, Page: 163 / 274

Search results

Summary of Contents for 3050-VM

Reviews: