manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 13 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 13

Chapter 1:  Preface

The 

Avaya VPN Gateway User Guide

 describes how to perform basic configuration and maintenance of

the Avaya VPN Gateway (AVG).

Who Should Use This Book

The 

Avaya VPN Gateway User Guide

 is intended for network installers and system

administrators engaged in configuring and maintaining a network. It assumes that you are

familiar with Ethernet concepts and IP addressing.

Related documentation

For full documentation on installing and using the many features available in the VPN Gateway

software, see the following manuals:

•

Avaya VPN Gateway Command Reference

 (NN46120-103). Describes each command

in detail. The commands are listed for each menu, according to the order they appear in

the Command Line Interface (CLI).

•

Avaya VPN Gateway Application Guide for SSL Acceleration

 (NN46120-100). Provides

examples on how to configure Secure Socket Layer (SSL) Acceleration through the

CLI.

•

Avaya VPN Gateway CLI Application Guide

 (NN46120-101). Provides examples on how

to configure VPN deployment through the CLI.

•

Avaya VPN Gateway BBI Application Guide

 (NN46120-102). Provides examples on how

to configure VPN deployment through the Browser-Based Interface (BBI).

•

Avaya VPN Gateway User Guide

 (NN46120-104). Describes the initial setup procedure,

upgrades, operator user management, certificate management, troubleshooting and

other general operations that apply to both SSL Acceleration and VPN.

•

Avaya VPN Gateway Administrator Guide

 (NN46120-105). VPN management guide

intended for end-customers in a Secure Service Partitioning configuration.

•

Avaya VPN Gateway Configuration - Secure Portable Office Client

 (NN46120-301). Gives

the feature list and provides general information about Secure Portable Office (SPO)

based VPN client.

•

Avaya VPN Gateway VMware Getting Started Guide

 (NN46120–302). Describes how to

install, configure, and deploy the Avaya VPN Gateway VMware appliances.

User Guide

April 2013     13

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments