manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 82 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 82

Changing a Users Password

Changing Your Own Password

All users can change their own password. Login passwords are case sensitive and can contain
spaces.

1. Log in to the AVG cluster by entering your user name and current password.

login:

cert_admin

Password:( cert_admin  user password)

2. Access the User Menu.

>> Main#

/cfg/sys/user

[User Menu]

-----------------------------------------------------
-------

passwd

- Change own password

expire

- Set password expire time
interval

list

- List all users

del

- Delete a user

add

- Add a new user

edit

- Edit a user

caphrase

- Certadmin export
passphrase

3. Type the 

passwd

 command to change your current password.

When your own password is changed, the change takes effect immediately without
having to use the 

apply

 command.

>> User#

passwd

Managing Users and Groups

82     User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments