AudioCodes Mediant 500 MSBR, User Manual

Page: 507 / 1248

Version 7.2 507 Mediant 500 MSBR
User's Manual 27. Routing
Parameter Description
[PstnPrefix_Index] Note: Each row must be configured with a unique index.
Name
route-name
[PstnPrefix_RouteName]
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 40 characters. By default, no value is
defined.
Note: Each row must be configured with a unique name.
Match
Source IP Group
src-ip-group-id
[PstnPrefix_SrcIPGroup
Name]
Assigns an IP Group from where the SIP message (INVITE) is
received.
By default, no value is defined.
To configure IP Groups, see Configuring IP Groups on page 333.
The IP Group can be used as the 'Serving IP Group' in the Accounts
table for obtaining authentication username/password for the call. To
configure registration accounts, see Configuring Registration Accounts
on page 363.
Source SIP Interface
src-sip-interface-name
[PstnPrefix_SrcSIPInterf
aceName]
Defines the SIP Interface on which the incoming IP call is received.
The default is Any (i.e., any SIP Interface).
To configure SIP Interfaces, see Configuring SIP Interfaces on page
325.
Note: If the incoming INVITE is received on the specified SIP Interface
and the SIP Interface associated with the specified IP Group in the
'Source IP Group' parameter (in this table) is different, the incoming SIP
call is rejected. If the 'Source IP Group' parameter is not defined, the
SIP Interface associated with the default SRD (Index 0) is used. If there
is no valid source IP Group, the call is rejected.
Source IP Address
src-ip-address
[PstnPrefix_SourceAddr
ess]
Defines the source IP address of the incoming IP call.
The IP address must be configured in dotted-decimal notation (e.g.,
10.8.8.5); not as an FQDN. By default, no value is defined.
Note:

The source IP address is obtained from the Contact header in the
INVITE message.

You can configure from where the source IP address is obtained,
using the SourceIPAddressInput parameter.

The source IP address can include the following wildcards:

"x": denotes single digits. For example, 10.8.8.xx represents all
the addresses between 10.8.8.10 and 10.8.8.99.

"*": denotes any number between 0 and 255. For example,
10.8.8.* represents all addresses between 10.8.8.0 and
10.8.8.255.
Source Phone Prefix
src-phone-prefix
[PstnPrefix_SourcePrefi
x]
Defines the prefix or suffix of the calling (source) telephone number.
The prefix can include up to 49 digits. You can use special notations for
denoting the prefix. For example, [100-199](100,101,105) denotes a
number that starts with 100 to 199 and ends with 100, 101 or 105. To
denote any prefix, use the asterisk (*) symbol. To denote calls without a
calling number, use the $ sign. For a description of available notations,
see Dialing Plan Notation for Routing and Manipulation Tables on page
979.
By default, no value is defined.