AudioCodes Mediant 500 MSBR, User Manual

Page: 58 / 1248

User's Manual 58 Document #: LTRT-10375
Mediant 500 MSBR
•
Search for the item by entering in the field the first few characters of the desired
row, and then clicking it. The figure below shows an example of searched results
for items (Proxy Sets) that begin with the letter "i":
Figure 7-7: Searching a Row to Reference

Selecting an existing referenced-row directly from the referenced-table:
a. Click View ; the table (e.g., IP Groups table) and dialog box in which the button
was clicked is minimized to the bottom-left corner of the Web interface and the
referenced-table (e.g., Proxy Sets table) opens.
b. Add a new row, if required; otherwise, skip this step.
c. Select the desired row in the row-referenced table, and then click Use selected
row located on the top-right of the table, as shown in the example below:
Figure 7-8: Selecting Referenced Row

Adding a new referenced-row:
a. From the drop-down list, select the Add new option; as shown in the example
below:
Figure 7-9: Selecting Add new Option
The table (e.g., IP Groups table) and dialog box in which the Add new option was
selected is minimized to the bottom-left corner of the Web interface and a dialog
box appears for adding a new row in the referenced-table (e.g., Proxy Sets table).
b. Configure the referenced-row and click Apply ; the referenced-table (e.g., Proxy
Sets table) closes and you are returned to the dialog box in which you selected
the
Add new option (e.g., IP Groups table), where the newly added row now
appears selected.