AudioCodes Mediant 500 MSBR, User Manual

Page: 1235 / 1248

Version 7.2 1235 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
RADIUS Servers
configure system >
radius servers
[RadiusServers]
Defines RADIUS servers.
The format of the ini file table parameter is as follows:
[ RadiusServers ]
FORMAT RadiusServers_Index = RadiusServers_ServerGroup,
RadiusServers_IPAddress, RadiusServers_AuthenticationPort,
RadiusServers_AccountingPort, RadiusServers_SharedSecret;
[ \RadiusServers ]
For a detailed description of this table, see Configuring RADIUS
Servers on page 208.
74.14.2.3 LDAP Parameters
The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below.
LDAP Parameters
Parameter Description
LDAP Service
configure system > ldap
settings > ldap-service
[LDAPServiceEnable]
Enables the LDAP feature.

[0] Disable (default)

[1] Enable
Note: For the parameter to take effect, a device reset is required.
LDAP Authentication Filter
configure system > ldap
settings > auth-filter
[LDAPAuthFilter]
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
authentication and authorization.
You can use the dollar ($) sign to represent the username. For
example, if the parameter is set to "(sAMAccountName=$)" and the
user logs in with the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
Use LDAP for Web > Telnet
Login
configure system > ldap
settings > enable-mgmt-
login
[MgmtLDAPLogin]
Enables LDAP-based management-user login authentication and
authorization.

[0] Disable (default)

[1] Enable
Note: For the parameter to take effect, a device reset is required.
[LDAPDebugMode] Determines whether to enable the LDAP task debug messages.
This is used for providing debug information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
LDAP Numeric Attribute
ldap-numeric-attr
[LDAPNumericAttributes]
Defines up to five LDAP Attributes (separated by commas) for
which the device employs LDAP query searches in the AD for
numbers that may have characters between the digits.
For more information, see Enabling LDAP Searches for Numbers
with Characters on page 238.
MS LDAP OCS Number
attribute name
configure voip > sip-
definition settings > ldap-
ocs-nm-attr
[MSLDAPOCSNumAttribute
Defines the name of the attribute that represents the user's Skype
for Business number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"msRTCSIP-Line".