AudioCodes Mediant 500 MSBR, User Manual

Page: 602 / 1248

User's Manual 602 Document #: LTRT-10375
Mediant 500 MSBR
•
Endpoints per Trunk Group: Open the Trunk Group Settings table (see
Configuring Trunk Group Settings on page 487), and then for the required Trunk
Group ID, configure the 'Registration Mode' parameter to
Per Endpoint
(TrunkGroupSettings_RegistrationMode).
2. Open the Authentication table ( Setup menu > Signaling & Media tab > Gateway
folder > Analog Gateway > Authentication ).
3. Select the row corresponding to the port that you want to configure, and then click
Edit ; the following dialog box appears:
Figure 31-5: Authentication Table - Edit Dialog Box
4. Configure authentication per port according to the parameters described in the table
below.
5. Click Apply .
Table 31-1: Authentication Table Parameter Descriptions
Parameter Description
General
Index
[Authentication_Index]
(Read-only) Displays the index number of the table row.
Module
port-type
[Authentication_Module]
(Read-only) Displays the module number on which the port is
located.
Port
port
[Authentication_Port]
(Read-only) Displays the port number.
Port Type
[Authentication_PortType]
(Read-only) Displays the port type (FXS or FXO).
Credentials
User Name
user-name
[Authentication_UserId]
Defines the username used for authenticating the port.
Password
password
[Authentication_UserPassw
ord]
Defines the password used for authenticating the port.