AudioCodes Mediant 500 MSBR, User Manual

Page: 500 / 1248

User's Manual 500 Document #: LTRT-10375
Mediant 500 MSBR
Parameter Description
Source Phone Prefix
src-phone-prefix
[PREFIX_SourcePre
fix]
Defines the prefix and/or suffix of the calling (source) telephone number. You
can use special notations for denoting the prefix. For example, [100-
199](100,101,105) denotes a number that starts with 100 to 199 and ends
with 100, 101 or 105. To denote any prefix, use the asterisk (*) symbol
(default) or to denote calls without a calling number, use the $ sign. For a
description of available notations, see Dialing Plan Notation for Routing and
Manipulation Tables on page 979.
The number can include up to 50 digits.
Destination Phone
Prefix
dst-phone-prefix
[PREFIX_Destinatio
nPrefix]
Defines the prefix and/or suffix of the called (destination) telephone number.
The suffix is enclosed in parenthesis after the suffix value. You can use
special notations for denoting the prefix. For example, [100-
199](100,101,105) denotes a number that starts with 100 to 199 and ends
with 100, 101 or 105. To denote any prefix, use the asterisk (*) symbol
(default) or to denote calls without a called number, use the $ sign. For a
description of available notations, see Dialing Plan Notation for Routing and
Manipulation Tables on page 979.
The number can include up to 50 digits.
Note:

For LDAP-based routing, enter the LDAP query keyword as the prefix
number to denote the IP domain:

"PRIVATE" = Private number

"OCS" = Skype for Business / OCS client number

"PBX" = PBX / IP PBX number

"MOBILE" = Mobile number

"LDAP_ERR" = LDAP query failure
For more information, see AD-based Routing for Microsoft Skype for
Business on page 238.

If you want to configure re-routing of ISDN Tel-to-IP calls to fax
destinations, enter the value string "FAX" (case-sensitive) as the
destination phone prefix. For more information, see the
FaxReroutingMode parameter.
Action
Destination IP Group
dst-ip-group-id
[PREFIX_DestIPGro
upName]
Assigns an IP Group to where you want to route the call. The SIP INVITE
message is sent to the IP address configured for the Proxy Set that is
associated with the IP Group.
Note:

If you select an IP Group, you do not need to configure a destination IP
address. However, if both parameters are configured in the table, the
INVITE message is sent only to the IP Group.

If the destination is a User-type IP Group, the device searches for a
match of the Request-URI in the received INVITE to an AOR registration
record in the device's database. The INVITE is then sent to the IP
address of the registered contact.

If the AlwaysUseRouteTable parameter is set to 1 (see Configuring IP
Groups on page 333), the Request-URI host name in the INVITE
message is set to the value configured for the 'Destination IP Address'
parameter (in this table); otherwise, if no IP address is defined, it is set to
the value of the 'SIP Group Name' parameter (configured in the IP Groups
table).

The parameter is used as the 'Serving IP Group' in the Accounts table for
acquiring authentication username/password for this call (see Configuring