AudioCodes Mediant 500 MSBR, User Manual

Page: 1022 / 1248

User's Manual 1022 Document #: LTRT-10375
Mediant 500 MSBR
Require Client
Certificates for HTTPS
connection
configure system > web
> req-client-cert
[HTTPSRequireClientCer
tificate]
Enables the requirement of client certificates for HTTPS connection.

[0] Disable = (Default) Client certificates are not required.

[1] Enable = Client certificates are required. The client certificate must
be preloaded to the device and its matching private key must be
installed on the managing PC. Time and date must be correctly set on
the device for the client certificate to be verified.
Note:

For the parameter to take effect, a device reset is required.

For a description on implementing client certificates, see TLS for
Remote Device Management on page 129.
74.4.3 SRTP Parameters
The Secure Real-Time Transport Protocol (SRTP) parameters are described in the table
below.
Table 74-24: SRTP Parameters
Parameter Description
Media Security
configure voip > media
security > media-
security-enable
[EnableMediaSecurity]
Enables Secure Real-Time Transport Protocol (SRTP).

[0] Disable (default)

[1] Enable
Note:

For the parameter to take effect, a device reset is required.
Media Security Behavior
configure voip > media
security > media-sec-
bhvior
[MediaSecurityBehaviour
]
Global parameter that defines the handling of SRTP (when the
EnableMediaSecurity parameter is set to 1). You can also configure this
feature per specific calls, using IP Profiles
(IpProfile_MediaSecurityBehaviour). For a detailed description of the
parameter and for configuring this feature in the IP Profiles table, see
Configuring IP Profiles on page 404.
Note: If this feature is configured for a specific IP Profile, the settings of
this global parameter is ignored for calls associated with the IP Profile.
Note: The parameter is applicable only to the Gateway application.
Master Key Identifier
(MKI) Size
configure voip > media
security > srtp-tx-packet-
mki-size
[SRTPTxPacketMKISize]
Global parameter that defines the size (in bytes) of the Master Key
Identifier (MKI) in SRTP Tx packets. You can also configure this feature
per specific calls, using IP Profiles (IpProfile_MKISize). For a detailed
description of the parameter and for configuring this feature in the IP
Profiles table, see Configuring IP Profiles on page 404.
Note: If this feature is configured for a specific IP Profile, the settings of
this global parameter is ignored for calls associated with the IP Profile.
Symmetric MKI
Negotiation
configure voip > media
security > symmetric-mki
[EnableSymmetricMKI]
Global parameter that enables symmetric MKI negotiation. You can also
configure this feature per specific calls, using IP Profiles
(IpProfile_EnableSymmetricMKI). For a detailed description of the
parameter and for configuring this feature in the IP Profiles table, see
Configuring IP Profiles on page 404.
Note: If this feature is configured for a specific IP Profile, the settings of
this global parameter is ignored for calls associated with the IP Profile.