AudioCodes Mediant 500 MSBR, User Manual

Page: 612 / 1248

User's Manual 612 Document #: LTRT-10375
Mediant 500 MSBR
2. Click New ; the following dialog box appears:
Figure 31-9: Tone Index Table - Add Dialog Box
The figure above shows a configuration example for using distinctive ringing and call
waiting tones of Index #9 ('Priority Index' 1) in the CPT file for FXS endpoints 1
through 4 when a call is received from a calling (source) number with prefix 2.
3. Configure distinctive ringing and call waiting tones per port according to the
parameters described in the table below.
4. Click Apply .
Table 31-7: Tone index Table Parameter Description
Parameter Description
Index Defines the table index entry. Up to 50 entries can be defined.
FXS Port First
fxs-port-first
[ToneIndex_FXSPort_Firs
t]
Defines the first port in the FXS port range.
FXS Port Last
fxs-port-last
[ToneIndex_FXSPort_Las
t]
Defines the last port in the FXS port range.
Source Prefix
src-prefix
[ToneIndex_SourcePrefix]
Defines the prefix of the calling number.
Destination Prefix
dst-prefix
[ToneIndex_DestinationPr
efix]
Defines the prefix of the called number.
Priority Index
priority
[ToneIndex_PriorityIndex]
Defines the index of the distinctive ringing and call waiting tones.
The call waiting tone index is equal to the value of the 'Priority Index'
parameter plus the value of the FirstCallWaitingToneID parameter
(which defines the index of the first call waiting tone in the CPT file).
For example, if you want to use the call waiting tone in the CPT file that