AudioCodes Mediant 500 MSBR, User Manual

Page: 806 / 1248

User's Manual 806 Document #: LTRT-10375
Mediant 500 MSBR

CLI Startup Script file
Warning:
•
When loading an ini file as described in this section, parameters not included in
the ini file are restored to default settings. If you want to keep the device's current
configuration settings and also apply the settings specified in the ini file, load the
file through the Auxiliary Files page, as described in Loading Auxiliary Files
through Web Interface on page 772.
•
Regarding device reset when loading a configuration file:
√
ini File: The device automatically resets for the settings to take effect.
√
CLI Script File: The device resets only if the file contains the reload command
(on the last line). For more information on this command, refer to the CLI
Reference Guide .
√
CLI Startup Script File: The device automatically resets twice for the settings
to take effect.

To load a configuration file to the device:
1. Open the Configuration File page:
•
Toolbar: From the Actions drop-down menu, choose Configuration File
•
Navigation tree: Setup menu > Administration tab > Maintenance folder >
Configuration File
2. Depending on the file type that you want to load:
•
ini File:
Figure 50-3: Loading ini File
a. Click Browse , and then navigate to and select the file.
b. Click Load INI File :
•
CLI Script File:
Figure 50-4: Loading CLI Script File
a. Click Browse , and then navigate to and select the file.
b. Click Load CLI Script File .
•
CLI Startup Script File:
Figure 50-5: Loading CLI Startup Script File
a. Click Browse , and then navigate to and select the file.
b. Click Load CLI Startup Script :
If the device resets (see note at the beginning of this section), you are prompted to log in
again to the Web interface.