AudioCodes Mediant 500 MSBR, User Manual

Page: 1227 / 1248

Version 7.2 1227 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
IP Media Parameters
Parameter Description
IPMedia Detectors
configure voip > media
ipmedia > ipm-detectors-
enable
[EnableDSPIPMDetectors]
Enables the device's DSP detectors for detection features such as
AMD.

[0] Disable (default)

[1] Enable
Note:

For the parameter to take effect, a device reset is required.

The DSP Detectors feature is available only if the device is
installed with a License Key that includes this feature. For
installing a License Key, see License Key on page 797.

When enabled (1), the number of available channels is reduced.
Conferencing Parameters
Conference ID
configure voip > gateway
dtmf-supp-service supp-
service-settings > conf-id
[ConferenceID]
Defines the Conference Identification string.
The valid value is a string of up to 16 characters. The default is
"conf".
Note: To join a conference, the INVITE URI must include the
Conference ID string preceded by the number of the participants in
the conference and terminated by a unique number. For example:
INVITE sip:4conf1234@10.1.10.10
INVITE messages with the same URI join the same conference.
Automatic Gain Control (AGC) Parameters
Enable AGC
configure voip > media
ipmedia > agc-enable
[EnableAGC]
Global parameter enabling the AGC feature.
You can also configure the feature per specific calls, using Tel
Profiles (TelProfile_EnableAGC). For a detailed description of the
parameter and for configuring the feature in the Tel Profiles table,
see Configuring Tel Profiles on page 440.
Note: If the feature is configured for a specific Tel Profile, the
settings of the global parameter is ignored for calls associated with
the Tel Profile.
For a description of AGC, see Automatic Gain Control (AGC) on
page 194.
AGC Slope
configure voip > media
ipmedia > agc-gain-slope
[AGCGainSlope]
Determines the AGC convergence rate:

[0] 0 = 0.25 dB/sec

[1] 1 = 0.50 dB/sec

[2] 2 = 0.75 dB/sec

[3] 3 = 1.00 dB/sec (default)

[4] 4 = 1.25 dB/sec

[5] 5 = 1.50 dB/sec

[6] 6 = 1.75 dB/sec

[7] 7 = 2.00 dB/sec

[8] 8 = 2.50 dB/sec

[9] 9 = 3.00 dB/sec

[10] 10 = 3.50 dB/sec

[11] 11 = 4.00 dB/sec

[12] 12 = 4.50 dB/sec

[13] 13 = 5.00 dB/sec