AudioCodes Mediant 500 MSBR, User Manual

Page: 304 / 1248

User's Manual 304 Document #: LTRT-10375
Mediant 500 MSBR
Rule Metric
rule-metric
[QualityOfServiceRules_RuleMet
ric]
Defines the performance monitoring call metric to which the rule
applies if the metric's threshold is crossed.

[0] Voice Quality = (Default) The device calculates MOS of
calls and if the threshold is crossed (i.e., poor quality), the
configured action (see 'Rule Action' parameter below) is done
for all
new calls and for the entire IP Group.

[1] Bandwidth

[2] ACD

[3] ASR

[4] NER

[5] Poor InVoice Quality = The device calculates MOS (and
TMMBR) of the call and if the threshold is crossed (i.e., poor
quality), the device uses a different IP Profile (see 'Rule
Action' parameter below) for the
current call only (not the
entire IP Group).
Severity
severity
[QualityOfServiceRules_Severity]
Defines the alarm severity level. When the configured severity
occurs, the device performs the action of the rule.

[0] Major (Default)

[1] Minor
Note: If you configure the 'Rule Metric' parameter to ACD , ASR
or NER , you must configure the parameter to Major . For all other
'Rule Metric' parameter values, you can configure the parameter
to any value.
Action
Rule Action
rule-action
[QualityOfServiceRules_RuleActi
on]
Defines the action to be done if the rule is matched.

[0] Reject Calls = (Default) New calls destined to the specified
IP Group are rejected for a user-defined duration. To
configure the duration, use the 'Calls Reject Duration'
parameter (see below).

[1] Alternative IP Profile = A different IP Profile is used for the
IP Group or call (depending on the 'Rule Metric' parameter).
To specify the IP Profile, use the 'Alternative IP Profile Name'
parameter (see below).
Note:

If you configure the 'Rule Metric' parameter to ACD , ASR or
NER , you must configure the parameter to Reject Calls .

If you configure the 'Rule Metric' parameter to Voice Quality
or Bandwidth :

If you configure the 'Severity' parameter to Minor , you
must configure the parameter to Alternative IP Profile .

If you configure the 'Severity' parameter to Major , you
can configure the parameter to any option.
When configured to Alternative IP Profile and the threshold
is crossed, the device changes the IP Profile for the entire IP
Group for all new calls.

If you configure the 'Rule Metric' parameter to Poor InVoice
Quality , you must configure the parameter to Alternative IP
Profile . If the threshold is crossed (i.e., poor call quality), the
device changes the IP Profile for the specific call only (during
the call).