AudioCodes Mediant 500 MSBR, User Manual

Page: 1135 / 1248

Version 7.2 1135 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference

[12] T1 5ESS 9 ISDN = ISDN PRI protocol for the
Lucent™/AT&T™ 5ESS-9 switch.

[13] T1 5ESS 10 ISDN = ISDN PRI protocol for the
Lucent™/AT&T™ 5ESS-10 switch.

[14] T1 DMS100 ISDN = ISDN PRI protocol for the Nortel™
DMS switch.

[15] J1 TRANSPARENT

[16] T1 NTT ISDN = ISDN PRI protocol for the Japan - Nippon
Telegraph Telephone (known also as INS 1500).

[17] E1 AUSTEL ISDN = ISDN PRI protocol for the Australian
Telecom.

[18] E1 HKT ISDN = ISDN PRI (E1) protocol for the Hong
Kong - HKT.

[19] E1 KOR ISDN = ISDN PRI protocol for Korean Operator
(similar to ETSI).

[20] T1 HKT ISDN = ISDN PRI (T1) protocol for the Hong
Kong - HKT.

[21] E1 QSIG = ECMA 143 QSIG over E1

[22] E1 TNZ = ISDN PRI protocol for Telecom New Zealand
(similar to ETSI)

[23] T1 QSIG = ECMA 143 QSIG over T1

[30] E1 FRENCH VN6 ISDN = France Telecom VN6

[31] E1 FRENCH VN3 ISDN = France Telecom VN3

[34] T1 EURO ISDN =ISDN PRI protocol for Euro over T1

[35] T1 DMS100 Meridian ISDN = ISDN PRI protocol for the
Nortel™ DMS Meridian switch

[36] T1 NI1 ISDN = National ISDN 1 PRI protocol

[40] E1 NI2 ISDN = National ISDN 2 PRI protocol over E1

[50] BRI EURO ISDN = Euro ISDN over BRI

[51] BRI NI2 ISDN

[52] BRI DMS 100 ISDN

[53] BRI 5ESS 10 ISDN

[54] BRI QSIG = QSIG over BRI

[55] BRI VN6 = VN6 over BRI

[56] BRI NTT = BRI ISDN Japan (Nippon Telegraph)

[57] BRI IUA
Note:

All PRI trunks must be configured as the same line type (either
E1 or T1). The device can support different variants of CAS
and PRI protocols on different E1/T1 spans (no more than four
simultaneous PRI variants).

BRI trunks can operate together with E1 or T1 trunks.

The ISDN BRI North American variants (NI-2, DMS-100, and
5ESS) are partially supported by the device. Please contact
your AudioCodes sales representative before implementing
this protocol.
[ProtocolType_x] Defines the protocol type for a specific trunk ID (where x denotes
the Trunk ID and 0 is the first trunk). For more information, see
the ProtocolType parameter.
[ISDNTimerT310] Defines the T310 override timer for DMS, Euro ISDN, and ISDN
NI-2 variants. An ISDN timer is started when a Q.931 Call