AudioCodes Mediant 500 MSBR, User Manual

Page: 404 / 1248

User's Manual 404 Document #: LTRT-10375
Mediant 500 MSBR
8. Click Apply .
Table 23-4: Allowed Video Coders Groups and Allowed Video Coders Tables Parameter
Descriptions
Parameter Description
Allowed Video Coders Groups Table
Index
allowed-video-coders-groups
<index>
[AllowedVideoCodersGroups_Ind
ex]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
coders-group-name
[AllowedVideoCodersGroups_Na
me]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique name.
Allowed Video Coders Table
Index
allowed-video-coders <group
index/coder index>
[AllowedVideoCoders_AllowedVi
deoCodersIndex]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
User Define Coder
user-define-coder
[AllowedVideoCoders_UserDefin
eCoder]
Defines a user-defined coder.
The valid value is a string of up to 24 characters (case-
insensitive). For example, "HD.123" (without quotes).
Note: Each coder can be configured only once per Allowed
Video Coders Group.
23.4 Configuring IP Profiles
The IP Profiles table lets you configure up to 20 IP Profiles. An IP Profile is a set of
parameters with user-defined settings relating to signaling (e.g., SIP message terminations
such as REFER) and media (e.g., coder type). An IP Profile can later be assigned to
specific IP calls (inbound and/or outbound). Thus, IP Profiles provide high-level adaptation
when the device interworks between different IP entities, each of which may require
different handling by the device. For example, if a specific IP entity uses the G.711 coder
only, you can configure an IP Profile with G.711 for this IP entity.
To use your IP Profile for specific calls, you need to assign it to any of the following:

IP Groups - see Configuring IP Groups on page 333

Gateway application: Tel-to-IP routing rules - see Configuring Tel-to-IP Routing Rules
on page 495

Gateway application: IP-to-Tel routing rules - see Configuring IP-to-Tel Routing Rules
on page 504
For the Gateway application: The device selects the IP Profile as follows:

If you assign different IP Profiles (not default) to the same specific calls in all of the
above-mentioned tables, the device uses the IP Profile that has the highest preference
level (as set in the 'Profile Preference' parameter). If these IP Profiles have the same
preference level, the device uses the IP Profile that you assigned in the IP Groups
table.