AudioCodes Mediant 500 MSBR, User Manual

Page: 862 / 1248

User's Manual 862 Document #: LTRT-10375
Mediant 500 MSBR
Index
[PerformanceProfile_Ind
ex]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Match
Entity
entity
[PerformanceProfile_Enti
ty]
Defines a configuration entity type to which you want to apply the rule.

[0] Global = (Default) The device calculates call metrics for all calls.

[1] SRD = Assigns an SRD. To specify the SRD, use the 'SRD'
parameter (see below).

[2] IP Group = Assigns an IP Group. To specify the IP Group, use the
'IP Group' parameter (see below).
IP Group
ip-group-name
[PerformanceProfile_IPG
roupName]
Assigns an IP Group to the rule.
Note: The parameter is applicable only if you configure the 'Entity'
parameter to IP Group .
SRD
srd-name
[PerformanceProfile_SR
DName]
Assigns an SRD to the rule.
Note: The parameter is applicable only if you configure the 'Entity'
parameter to SRD .
PM Type
pmtype
[PerformanceProfile_PM
Type]
Defines the type of performance monitoring metric for which you want to
configure thresholds.

[16] ASR (Default)

[17] ACD

[18] NER
Action
Minor Threshold
minor-threshold
[PerformanceProfile_Min
orThreshold]
Defines the Minor threshold (in percentage) of the selected performance
monitoring metric, which is the lower threshold located between the
Yellow and Green states.
To consider a threshold crossing:

Increase in severity (i.e., Green to Yellow): Only this value is used.

Decrease in severity (Red to Green, or Yellow to Green): This
value is used with the hysteresis, configured by the 'Hysteresis'
parameter (see below).
The valid range is 0 to 100. The default is 0.
Major Threshold
major-threshold
[PerformanceProfile_Maj
orThreshold]
Defines the Major threshold (in percentage) of the selected performance
monitoring metric, which is the upper threshold located between the
Yellow and Red states.
To consider a threshold crossing:

Increase in severity (i.e., Yellow to Red, or Green to Red): Only
this value is used.

Decrease in severity (Red to Yellow): This value is used with the
hysteresis, configured by the 'Hysteresis' parameter (see below).
The valid range is 0 to 100. The default is 0.