AudioCodes Mediant 500 MSBR, User Manual

Page: 445 / 1248

Version 7.2 445 Mediant 500 MSBR
User's Manual 23. Coders and Profiles
Tel Profile Parameter Global Parameter
[TelProfile_SwapTelToIpPhoneNum
bers] INVITE message contains the swapped numbers.

[0] Disable (default)

[1] Enable
Note: The corresponding global parameter is
SwapTEl2IPCalled&CallingNumbers.
IP2Tel CutThrough Call Behavior
ip2tel-cutthrough_call_behavior
[TelProfile_IP2TelCutThroughCallBe
havior]
Enables the Cut-Through feature, which allows phones
connected to the device’s FXS ports to automatically receive
IP calls (if there is no other currently active call) even when
in off-hook state (and no call is currently active).

[0] Disable = Calls can only be received in on-hook state.

[1] CutThrough = (Enabled with tones) Calls can be
received in off-hook state. When the IP side ends the call,
the device can play a reorder tone to the Tel side for a
user-defined duration (configured by the
CutThroughTimeForReorderTone parameter). Once the
tone stops playing, the FXS phone is ready to
automatically answer another incoming IP call in off-hook
state. A waiting call is automatically answered by the
device when the current call is terminated (and if the
EnableCallWaiting parameter is configured to 1).

[2] CutT Paging = (Enabled and no tones) Calls
can be received in off-hook state, but no tones are played
(before or after the call) in off-hook state. The option is
useful for paging calls, which provides a one-way voice
path from the paging phone to the paged phones (FXS
phones).
Note:

The parameter is applicable only to FXS interfaces.

The corresponding global parameter is CutThrough.
Voice
DTMF Volume
dtmf-volume
[TelProfile_DtmfVolume]
Defines the DTMF gain control value (in decibels) to the Tel
side.
The valid range is -31 to 0 dB. The default is -11 dB.
Note: The corresponding global parameter is DTMFVolume.
Input Gain
input-gain
[TelProfile_InputGain]
Defines the pulse-code modulation (PCM) input (received)
gain control level (in decibels), which is the level of the
received signal for Tel-to-IP calls.
The valid range is -32 to 31 dB. The default is 0 dB.
Note: The corresponding global parameter is InputGain.
Voice Volume
voice-volume
[TelProfile_VoiceVolume]
Defines the voice gain control (in decibels), which is the level
of the transmitted signal for IP-to-Tel calls.
The valid range is -32 to 31 dB. The default is 0 dB.
Note: The corresponding global parameter is VoiceVolume
Enable AGC
enable-agc
[TelProfile_EnableAGC]
Enables the Automatic Gain Control (AGC) feature. The
AGC feature automatically adjusts the level of the received
signal to maintain a steady (configurable) volume level.

[0] Disable (default)