AudioCodes Mediant 500 MSBR, User Manual

Page: 759 / 1248

Version 7.2 759 Mediant 500 MSBR
User's Manual 45. Basic Maintenance
45 Basic Maintenance
This section describes basic maintenance procedures.
45.1 Resetting the Device
You can reset the device through the device's management tools. Device reset may be
required for maintenance purposes. Certain parameters require a device reset for their
settings to take effect. These parameters are displayed in the Web interface with the
lightning symbol. In addition, whenever you do any configuration change that requires a
reset, the
Reset button on the Web interface's toolbar is displayed with a red border, as
shown below:
The Web interface also provides you with the following options when resetting the device:

Save current configuration to the device's flash memory (non-volatile) prior to reset

Reset the device only after a user-defined time (G raceful Shutdown ) to allow current
calls to end (calls are terminated after this interval)
Note: Upon reboot, the device restores the settings from its configuration file.
However, if reboot attempts fail three times consecutively, the device resets the
configuration file by restoring factory defaults before attempting to reboot.
To reset the device (and save configuration to flash) through CLI, use the following
command:
# reset now

To reset the device through Web interface:
1. Open the Maintenance Actions page:
•
Toolbar: Click the Reset button.
•
Navigation tree: Setup menu > Administration tab > Maintenance folder >
Maintenance Actions .
Figure 45-1: Resetting the Device
2. From the 'Save To Flash' drop-down list, select one of the following:
•
Yes: Current configuration is saved ( burned ) to flash memory prior to reset
(default).
•
No: The device resets without saving the current configuration to flash. All
configuration done after the last configuration save will be discarded (lost) after
reset.
3. From the 'Graceful Option' drop-down list, select one of the following: