132
© 2019, ATEÏS, member of PAX ProAV Group
5.1.10.1.5 Fault active
The [Fault Active] event allows users to set the customized fault for monitoring purpose. When this
event is activated, the custom message of this fault will display on LCD panel, as well as the fault
LED will light up, and along with other warning indications such fault reply, record the fault on fault
list, and trigger the warning tone.
Event name: The name of this event.
Fault: Set the display message when this event is triggered.
5.1.10.1.6 Fault inactive
The [Fault Inactive] event is used to deactivate the
event. After deactivate the selected
[Fault active] event, the fault LED on front panel will light off, and the fault relay will be switched to
non-fault status, and the warning tone will stop output.
Event name: The name of this event.
Inactive: Choose a [Fault Active] event you wish to cancel from the drop-down box.
5.1.10.1.7 Evac input reset
If the [Evac Input Reset] event is activated, it will cancel the [ON Function] event which is under
Evacuation inputs > Active type > Trigger mode
, see the picture below.
Event name: The name of this event.
Device list: Choose to reset all the evac inputs of the BTQ-VM4/VM8/SG8 or all the controllers.
o
All: All BTQ-VM4/VM8/SG8 units.
