System overview
23
© 2019, ATEÏS, member of PAX ProAV Group
6. All/Release button:
This button is used for select/deselect all zones.
7. All/Release LED:
The LED will light up in blue/light off if all the zones are selected/deselected.
8.Talk button (press-to-talk):
Start paging via press-to-talk mode or lock-to-talk mode. The talk mode can be set via web
browser.
9. Talk LED:
After the Talk button is pressed, this LED will light up to indicate the mic is active and the
DPM is able to page.
The LED will blink when the chime is playing.
If the paging request is granted, zones under paging can still be occupied by other sources
with higher priority, and the Busy LED will light up in red.
Side panel:
1. Headphone jack output:
External headphone 3.5mm jack output.
2. Microphone jack input:
External microphone 3.5mm jack input.
When the external microphone is connected, the
gooseneck mic on DPM-MAIN will be disable;
when external headphone is connected, the
loudspeaker on DPM-EVA will also be disable.
Rear panel:
Remote console sockets:
Connect the DPM-MAIN to BTQ-VM/SL/SG or
cascade the next DPM-MAIN, DPM-T5, CD-
8DF/16DF/T5DF, DGL-MIC via this redundant
RJ45 sockets (A and B port). See the wiring
connection from
If the power supply of DPM is insufficient, it
needs to be connected to a DLR01 digital loop
repeater for expanding the distance to 250M
longer. And if the power of DPM units is not
enough, connect a 24VDC local power on
DLR01.
Bottom panel:
