Configuration
103
© 2019, ATEÏS, member of PAX ProAV Group
5.1.7.1.7 RS232 port
Speed baud, date bits, stop bits, parity: Set the settings for 3rd party control.
5.1.7.1.8 Third party controls
Allow 3rd party devices to control the paging events via RS232, Modbus and Ethernet (UDP).
RS232 & Modbus serial type:
o
Modbus DTMF: Choose which DTMF code to proceed the zone paging via Modbus, see
o
Serial control: Enable/disable the 3rd party control from the serial link of BTQ-VM4/VM8
controller. Once enabled, the "Serial Protocol" setting area is required.
o
Serial protocol: Choose to use which 3rd party protocol (Modbus/RS232 3rd party).
Ethernet & Mobus type:
o
Net control: Enable/disable the 3rd party control function via UDP/IP or TCP/IP connection.
Once enabled, the ''Net Port'' setting is required.
o
Net protocol & port: Choose the 3rd party protocol (Ethernet 3rd party/Modbus) and set the
network port.
IGMP/IGMP IP:
Enable/disable the action of using the IGMP address. When it's enable, please set the fix IGMP
IP address, if it's disable, the system will use the random IGMP address during paging.
5.1.7.1.9 Zone settings
When manually selected the zone buttons on front panel of main controllers and secondary units for
audio routing and playing message. The zone selection will be canceled automatically if it doesn't
proceed a paging or routing over [Release time], and the LED selection will light off, too.
