Ateis BOUTIQUE BTQ-VM425W1 User Manual Download Page 131

Page: 131 / 179

Configuration

131

Event name: The name of this event.

Security enable/disable: Enable (activate) or disable (deactivate) the security mode when the event
is triggered.

5.1.10.1.2 Scheduler switch

The [Scheduler Switch] event is used to enable/disable the scheduler function of system.

Event name: The name of this event.

Scheduler enable/disable: Enable or disable the scheduler function of the system.

5.1.10.1.3 Wave select

The [Wave Select] event is used to assign the file path of the recorded message file when using the
DPM-T5/DPM-MAIN for recording. See

DPM-T5 Record/Listen/Paging

chapter for details.

Event name: The name of this event.

File path: Select the file path of the recorded message on BTQ-VM4/8. The recorded message file
will be displayed on

Message Management

, too.

File Name: The name of the recorded message file.

5.1.10.1.4 Stop paging

The [Stop Paging] event is used to stop all the paging sources or the specific paging source.

Event name: The name of this event.

Stop all source: Tick this option to stop all the paging sources.

Stop target source: Choose to stop one specific target source.

Summary of Contents for BOUTIQUE BTQ-VM425W1




















































































































































































Search results

Summary of Contents for BOUTIQUE BTQ-VM425W1

Reviews:

Related manuals for BOUTIQUE BTQ-VM425W1

Brands by name

Popular brands

Ateis BOUTIQUE BTQ-VM425W1, User Manual

Search results

Summary of Contents for BOUTIQUE BTQ-VM425W1

Reviews:

Related manuals for BOUTIQUE BTQ-VM425W1

Brands by name

Popular brands