System overview
31
© 2019, ATEÏS, member of PAX ProAV Group
A fully monitored microphone is designed for EVAC paging. The paging button supports both
press-to-talk and lock-to-talk mode. The talk mode can be set via web browser.
2. Monitoring speaker:
This built-in speaker is to monitor the zone audio including message and BGM. When the faults
detected by the system, the system will generate a buzzer sound (tone) as warning.
3. Programmable button:
There are 8 (CD-8DF) / 16 (CD-816F) programmable buttons for zone paging, event triggering,
message routing, message play, level control etc..
4. Busy LED:
The LEDs will light up when the zones are occupied by the other audio sources.
Green LED: The paging zones are occupied by the other audio sources which has lower
priority, and is able to page.
Continuous blink in green: The selected zones on CD-8DF/CD-816F are under paging now.
Red LED: The paging zones are occupied by the other audio sources which has higher
priority, and is not able to page.
5. Hold LED:
The LEDs will light up blue when the zones/zone group are selected and allowed to distribute.
The LEDs will blink once in blue when the the event is triggered.
6. Evacuation button:
Once this button is pushed, the system will enter to emergency state. The red LED will light up
and play/route the EVAC messages.
7. Power LED:
The LED will light up in green when CD-8DF/CD-816F is powered.
8. Press to talk button & LED:
Start a EVAC paging via press-to-talk mode.
9. Select/cancel all/reset evacuation button & LED:
This button is used for select/deselect all zones. The LED will light up in blue/light off if all the
zones are selected/deselected.
2.5.4
CD-T5DF wallmount touchpanel paging
mic
The CD-T5DF wall-mount paging console comes with a LCD touch screen panel, fireman microphone
and evacuation button. It is designed with an encased IP30 heavy-duty metal box with a lockable
cover. The 5" TFT touch screen panel provides call-paging, message broadcasting, event triggering,
