118
© 2019, ATEÏS, member of PAX ProAV Group
There are two types of paging events:
1. Integration: An integration paging event is used for multiple codes (keys) for zone selection.
Each code can assign the key of the paging consoles such as DPM-MAIN and DPM-T5.
2. Singular: This paging event is similar to the integration paging event except that it ''only has
one code (key)''.
Copy: When multiple main controllers are connected on the BOUTIQUE system, and require to
use different kinds of audio input for paging, click [Copy] button to add (create) a paging source in
the same source category (MSG TEST, ALERT, EVAC etc.) for other main controllers.
Setting: Click it to edit the paging event.
Delete: Click it to delete the paging event.
5.1.8.3.1 Add singular type
1. When multiple controllers are connected on the BOUTIQUE system, users can create additional
paging sources for main controllers. Click [Add Singular Type] button on the top right area of
Paging window, and its control window will displayed as the picture below.
Source: Choose the paging source of controller.
Evac/Security: See
to learn more about the two options.
Priority: Set the priority of the event. 99 is the lowest, 1 is the highest. When two paging
sources attempt to page to the same zone, the source with higher priority can proceed the
paging.
Percent: This is to determine a paging request which can be allowed or denied by the
percentage. If the percentage of available zones is greater than the number set at "Percent",
the paging event will be performed successfully. On the opposite, the paging request will be
