12
© 2019, ATEÏS, member of PAX ProAV Group
6. Reset button:
This button is used to reset the emergency state. The evac message playing will be canceled,
and the red evacuation button will light off.
7. Active LED (fireman microphone):
The LED will light up when the fireman microphone is under paging.
8. Touch screen panel:
2.2" color touch panel offers a graphical interface to control, configure and display the status
of system.
9. + - button:
Navigate as volume up/down or increase/decrease control.
10.
button:
Navigate as up/down control.
11. ESC button:
Navigate as go back to previous page.
12. OK button:
Navigate as next/save action. See more details about the
.
13. MSG Test button and LED:
A button to manually play the testing alert message to the selected or pre-defined zones, and a
LED will light up as long as the button is pushed.
14. Alert button and LED:
A button to manually play the alert message to selected or pre-defined zones, and a LED will
light up as long as the button is pushed.
15. All Call/Cancel button:
A button to select all the zones in the entire BOUTIQUE system or reset the current zone
selection.
16. Route button:
A button to manually route the selected music source (CD/Tuner/Aux/USB/Internet) to selected
or pre-defined zones.
17. Select button:
A button to manually select the music source (CD/Tuner/Aux/USB/Internet) to be routed.
18. CD/Tuner/Aux/USB/Internet LED:
Four LEDs to indicate which music source is active.
19. Selected zone button:
Select or deselect the zone for manual music routing or message/EVAC paging (CD/Tuner/Aux/
USB/Internet/fireman mic/XLR mic).
If none of the zones among controllers and secondary units are selected on the front panel, the
system will route to the zones configured by web browser.
20~22. VACIE indicator LED:
There are 4 or 8 rows of 3 LEDs that show real-time mode of the status of zone:
20. Selected LED (4 or 8 zones): The blue LED will light up to indicate the selection of
zones.
