Configuration
127
© 2019, ATEÏS, member of PAX ProAV Group
8. Press the DTMF keys, and the
intercom call will be called to the
zones based on the settings you set
on BOUTIQUE web browser (Step
2).
The instruction of DTMF key
1. Dial = #X
# = start
= end
Example:
o
If you would like to paging to Code [2], then dial #2
o
The paging function will be activated right way after finishing dialing.
2. Cancel the call = #
Example:
o
If you would like to cancel the paging, then enter #
o
The paging function will be canceled right way after finishing dialing.
3. Redial: When dialing the wrong code, simply redial the correct code again after the wrong
code.
Example: If you dial the Code [3] to the wrong Code [2], you only need to redial the
correct code again (2) after the wrong one. The situation might be shown as #2#3
5.1.8.3.2.3 DTMF paging call via Modbus
Proceed the zone paging by using the programmed DTMF keys via ModBus protocol.
1. First, create an [Integration Type] event.
2. Choose [ModBus] on [Source] option, and select the zones which the paging call will be made by
the corresponding DTMF keys.
