Hardware configuration & operation
73
© 2019, ATEÏS, member of PAX ProAV Group
4.2.8
Setting
1. Auto: The DPM-T5/DPM-T5F/CD-T5DF will
detect whether the external headset or USB is
plugged in, and auto switch to headset or
USB I/O connection if it's plugged in. If the
headset and USB are plugged in DPM-T5/
DPM-T5F/CD-T5DF at the same time, the
audio I/O connection will switch to USB.
2. MIC to SPK: Use the mic and speaker of
DPM-T5/DPM-T5F/CD-T5DF as input and
output.
3. Head to head: Use the external headset.
4. USB to USB: Replace the mic and speaker of
DPM-T5/DPM-T5F/CD-T5DF by PC/Laptop.
5. Mic/speaker volume: The level control of the
built-in microphone/speaker of DPM-T5/DPM-
T5F/CD-T5DF.
Set the Remote ID of this DPM-T5/DPM-T5F/
CD-T5DF. Up to 8 DPM-T5/DPM-T5F/CD-T5DF
can be connected to BTQ-SL8, and 16 on
BTQ-VM4/VM8/SG8.
Please note the remote ID you set here
needs to be the same you set on the web
browser, otherwise, the DPM-T5/DPM-T5F/
CD-T5DF will display in offline status on web
browser >
1. Mic calibration: To let the detection of
gooseneck mic be more accurate, users can
proceed this function.
o
First, plug out the gooseneck mic from DPM-
T5/DPM-T5F/CD-T5DF first, and press [Open
Calibration] button to get the [Open] value.
o
Then plug in the mic on DPM-T5/DPM-T5F/
CD-T5DF
again,
then
press
[Connect
Calibration] to get the [Connect] value.
o
The [Open] and [Connect] value will be used
for reference when detects a mic fault (open/
short fault).
2. Lamp: Press to test the color of LCD panel.
3. Logout: Click to logout.
4. Choose the language via
button, then click [Save]. Please reboot the device after
modification, so that the setting will be applied to DPM-T5/DPM-T5F/CD-T5DF device.
