DRV-28 inverter
s Basic operartion instructions
-41-
Fig 5.9 List edit diagram 1
Press
key to enter edit interface, select the operation needed, and press
key,
key or
key to confirm the edit operation and return to the previous menu (parameter list), the
returned list is the list edited. If
key or
key is pressed in edit interface wihouth selecting
edit operation, it will return to the previous menu (parameter list remain unchanged).
Note: For the parameter objects in the list header, shift-up operation will be invalid, and the
same principle can be applied to the parameter objects in the list footer; after deleting a
certain parameter, the parameter objects under it will be shifted up automatically.
The monitoring items displayed in the parameter list of running state can be added by users as
needed (through the menu of the function code in state check group), and the list can also be edited
by users eg "shift up", "shift down" and "delete from the list". The edit function is shown in the
interface below.
Fig 5.10 List edit diagram 2
The parameter list of common parameter setup can be added, deleted or adjusted by users as
needed, including delete, shift-up and shift-down; the addition function can be set in a certain function
code of a function group. The edit function is shown in the figure below.
Fig 5.11 List edit diagram 3
5.4.3 Add parameters to the parameter list displayed in stop/running state
In the fourth-level menu of "State monitoring", the parameters in the list can be added to the
"parameter displayed in stop state" list or "parameter displayed in running state" list as shown below.
