Applied Innovation AISwitch AI2524, User Manual, Page: 305 / 418

Chapter 12: AI2524 X.25 Configuration Steps
August 1997 Page 12-47
2524UM
Apply an Access List to a Line
In line configuration mode, apply an access list to a virtual line by re-
stricting incoming and outgoing connections between a particular vir-
tual terminal line (into a Cisco access server) and the addresses in an
access list:
access-class access-list-number in
The access list number is used for incoming TCP access and for in-
coming PAD access. For TCP access, the protocol translator uses the
defined IP access lists. For incoming PAD connections, the protocol
translator uses the defined X.29 access list. If you want to have access
restrictions only on one of the protocols, create an access list that per-
mits all addresses for the other protocols.
Create an X.29
Profile Script
You can create an X.29 profile script for th
translate
command.
When an X.25 connection is established, the protocol translator acts as
if an X.29 Set Parameter packet had been sent containing the parame-
ters and values set by this command.
In global configuration mode, create an X.29 profile script:
x29 profile name parameter :value
[ parameter:value ]
Example: X.29 Profile Script
This profile script turns local edit mode on when the connection is
made and establishes local echo and line termination upon receipt of a
Return. The name linemode is used with the
translate
command
to activate this script.
x29 profile linemode 2:1 3:2 15:1
translate tcp 172.30.1.26 x25 55551234 profile linemode