Applied Innovation AISwitch AI2524, User Manual, Page: 205 / 418

Chapter 9: AI2524 OSI/CLNP Configuration Steps
August 1997 Page 9-47
2524UM
route-map
command. The
set
commands specify the redistribu-
tion set actions—the particular redistribution actions to perform if th
criteria enforced by th
match
commands are met. When all matc
criteria are met, all
set
actions are performed
The
match route-map
configuration command has multiple for-
mats. The
match
commands may be given in any order, and all de-
fined match criteria must be satisfied to cause the route to be
redistributed according to th
set
actions given with the
set
com-
mands.
In route-map configuration mode, define the match criteria for redis-
tribution of routes from one routing protocol into another by perform-
ing at least one of these
z
Match routes that have a network address matching one or more of
the specified names (the names can be a standard access list, filter
set, or expression).
match clns address name [name...name ]
z
Match routes that have a next hop address matching one or more
of the specified names (the names can be a standard access list, fil-
ter set, or expression).
match clns next-hop name [name...name ]
z
Match routes that have been advertised by routers matching one or
more of the specified names (the names can be a standard access
list, filter set, or expression).
match clns route-source name [name...name ]
z
Match routes that have the next hop out matching one or more o
the specified interfaces.
match clns interface type number [type
number...type number ]
z
Match routes that have the specified metric.
match metric metric-value
z
Match routes that have the specified route type.
match route-type {level-1 | level-2}
In route-map configuration mode, define
set
actions for redistribu-
tion of routes from one routing protocol into another by performing at
least one of these:
z
Set the routing level of the routes to be advertised into a specified
are of the routing domain.
set level {level-1 | level-2 | level-1-2}