manualshive.com logo in svg

Applied Biosystems Data Explorer 4 Series, User Manual

Share
Download
Applied Biosystems Data Explorer 4 Series User Manual Download Page 82

Chapter  2    Using Chromatogram and Spectrum Windows

2-26

Applied Biosystems

2

Changing the

active trace

To change the active trace in an overlay:

1.

From the Display menu, deselect Overlay.

2.

Click the trace to activate.

3.

From the Display menu, select Overlay.

Sequentially

activating

overlaid spectra

When you display overlaid traces, you can sequentially 
activate each trace by clicking 

 and 

. 

NOTE: If you overlay processed spectra, and then display a 
different spectrum number, the processed spectrum is lost. 
For example, assume you smooth Spectrum #3 in a trace, 
then overlay it with another trace. If you select Spectrum 
#3, then click 

 to display Spectrum #2, then click 

 

to return to Spectrum #3, Spectrum #3 is no longer 
smoothed.

Setting overlay

attributes

To set overlay attributes:

1.

Display the individual traces to overlay.

2.

Select Graphic Options from the Display menu.

The Graph and Plot Options dialog box is displayed.

NOTE: If traces are overlaid when you select Graphic 
Options, you can set attributes for the active trace only. 

3.

Click View Setup.

4.

To apply the graphic options to all traces, select the Use 
same settings for all traces check box.

NOTE: If the Use same settings for all traces check box 
is selected when traces are overlaid, the attributes are 
applied to the active trace only. When you display 
individual traces again, settings are applied to all 
traces.

Summary of Contents for Data Explorer 4 Series
































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands