Applied Biosystems Data Explorer 4 Series, User Manual

Page: 235 / 447

Automatic Calibration
Data Explorer
™
Software User’s Guide 5-31
5
5. To add up to 10 reference masses to the Masses to Match
list, do either of the following:
• Click Add All to add the first 10 reference masses
from the reference file.
• Click Add Reference To List to individually select
reference masses to add.
NOTE: If the current list already contains
10 reference masses, you must delete a mass
before you click Add References to List.
If you click Add Reference to List, the Select or Create
Reference Peak Information dialog box (Figure 5-8) is
displayed and lists all masses in the reference file. If
you click Add All, this dialog box is not displayed.
Figure 5-8 Select or Create Reference Peak
Information Dialog Box