Applied Biosystems Data Explorer 4 Series User Manual Download Page 81

Page: 81 / 447

Manipulating Traces

Data Explorer

™

Software User’s Guide

2-25

NOTE: When saving results, only the results for the
active trace are saved.

Overlaying traces

in a single data

file

To overlay traces in a single data file:

Display the chromatogram or spectrum traces you want

to overlay. For more information, see Section 2.4.4,
Adding Traces from the Same Data File to a Window

To use settings other than defaults, set attributes for the
overlay if needed. See “Setting overlay attributes” on
page 2-26.

Click the trace of interest to activate it.

NOTE: Only the active trace in an overlay is affected by
processing tools. However, all traces are affected by
zooming functions.

From the Display menu, select Overlay Traces.

Hint: A toolbar button is available to toggle between
Overlay and Undo Overlay mode. See “Customizing
toolbars” on page 1-21 for information. The

button

is located in the Graph category.

The traces are overlaid. The trace names are listed in
the trace label.

NOTE: When saving results, only the results for the
active trace are saved.

Summary of Contents for Data Explorer 4 Series
































































































































































































































































































































































































































































Search results

Summary of Contents for Data Explorer 4 Series

Reviews:

Related manuals for Data Explorer 4 Series

Brands by name

Popular brands

Applied Biosystems Data Explorer 4 Series, User Manual

Search results

Summary of Contents for Data Explorer 4 Series

Reviews:

Related manuals for Data Explorer 4 Series

Brands by name

Popular brands