manualshive.com logo in svg

Applied Biosystems Data Explorer 4 Series, User Manual

Share
Download
Applied Biosystems Data Explorer 4 Series User Manual Download Page 238

Chapter  5    Examining Spectrum Data

5-34

Applied Biosystems

5

5.4.3  Automatically Calibrating 

(Mariner Data Only) 

This section includes:

•

Automatically calibrating

•

Applying new constants to the data file

•

Calibration results

•

Applying auto calibration settings to other files

Automatically

calibrating

To automatically calibrate:

1.

Open the data file to calibrate.

2.

Click the Spectrum window.

3.

From the Process menu, select Mass Calibration, select 
Auto Calibrate State, then select On.

NOTE: The Auto Calibrate State command setting is 
stored in a .DAT file. That is, if you turn on this 
command, then close the .DAT file, the command is on 
the next time you open the .DAT file.

NOTE: The Auto Calibrate State command is dimmed 
unless you specified automatic calibration settings in 
the data file. See Section 5.4.2, Importing and 
Specifying Automatic Calibration Settings.

4.

Display the spectrum of interest.

The spectrum is calibrated and displayed with an AC 
trace label if calibration is successful. Calibration 
results are displayed in the Output window.

If calibration fails, the spectrum is displayed with an 
AC-failed trace label.

Summary of Contents for Data Explorer 4 Series
































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands