Altigen AltiWare OE 4.0, Administration Manual

Page: 53 / 238

Defining an IP Dialing Table
AltiWare OE System Administration Manual 43
S
ystem
C
o
n
fig
u
ra
tio
n
Defining Remote Locations
To add a location, click the Add button to open a entry dialog box:
Define the attributes for the entry:
• Location—a unique dialing number to connect to the remote location.
The length of the number is of course the Location ID Digit Length
described in “About the Location ID Digit Length” on page 41.
• Location Name—a descriptive name of up to 15 characters to identify
the location. This name may be used by Caller ID.
• Server IP Address—the remote server’s address in one of the
following formats:
— RFC assigned IP address (e.g. 100.100.100.100). IP addresses with
prefixes of 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16 can only be
used within private networks (Intranets).
— Fully qualified DNS name (e.g., newyork.altigen.com), of up to 64
characters.
This IP address format is recommended over DNS names, since with
the IP address, the application does not need to resolve the name.
• Remote Ext. Length—the length of extension digits at the remote
location. Valid entries are None - 7, with “None” meaning not
specified. Specifying the remote extension length is optional but
highly recommended, since this information tells the system how long
to wait for another entry before outpulsing (sending the digits).
• Dialing Scheme. Overlapping (ATGN) is best used with analog
trunks to allow the terminal to omit part of the digits required to
complete a call while buffering the remaining digits. Enbloc, used
with digital (ISDN) trunks, allows the terminal to include all of the
digits required to complete a call.