Altigen AltiWare OE 4.0, Administration Manual

Page: 179 / 238

Setting up an Exchange Server
AltiWare OE System Administration Manual 169
D
a
ta an
d
In
ter
n
et
In
te
gr
a
tio
n
Prerequisites
It is assumed that you already have prepared two NT servers—one with the
AltiWare OE software and the other with Exchange Server software.
On the AltiServ System
You need to have Windows NT 4.0 with Service Pack 6a or higher. Check
the version of NT by clicking the Start button, select Run, and type
winver in the Run dialog box.
This action should bring up a About Windows NT dialog box that displays
the version of NT running on your system. It should say
Version 4.0
(Build 1381: Service Pack 6)….Revised Service Pack 6a.
If you have an older version of NT, upgrade to the latest version. Check
http://www.microsoft.com/ntserver to get the latest service pack for
Windows NT.
The AltiWare OE software version should be OE 3.5 or higher. Check the
version of OE software by selecting About from the Help menu of
AltiWare Administrator. The version displayed should be AltiWare OE 3.5
or higher. If you have an older version, contact AltiGen Technical Support
to find out how to upgrade to the latest version of AltiWare.
The AltiServ system and the Exchange server system must belong to the
same NT domain. You can check the domain to which your system belongs
by doing the following: On the AltiServ system, go to Start
➜
Settings
➜
Control Panel
➜
Network. In the Identification tab of the
Network dialog box, verify that you see two text boxes, Computer Name
and Domain. Note down the value in the Domain field.
Now, repeat the same steps on the Exchange server system and make sure
the domain names are the same.
AltiGen Services should be started with the user account
<Domainname>\AltiGen_<AltiserveSystemName>. For example,
ALTICHINA\AltiGen_TELESYSTEM.