Altigen AltiWare OE 4.0, Administration Manual

Page: 185 / 238

Setting up an Exchange Server
AltiWare OE System Administration Manual 175
D
a
ta an
d
In
ter
n
et
In
te
gr
a
tio
n
Do the following:
1. Add <Domain>\AltiGen_<AltiServSystemName> (e.g.
AltiGen_telesystem) account to the account list.
2. Change the accounts role to Service Account Admin by selecting
Service Account Admin from the Roles combo box.(see figure 1).
Repeat the above two steps to is process for the Domain and
Configuration containers. The name of Site is ITGTEST1. The name of
Configuration is Configuration.
Finally, stop and restart all the services of Exchange Server, or reboot the
Exchange server.
Installing Outlook 2000 Client on the AltiServ System
Outlook 2000 has two modes: Internet Only mode and Corporate or
Workgroup mode. To enable the Exchange Integration feature, you
MUST configure it to use Corporate or Workgroup mode.
If you have already installed Outlook 2000 in the AltiServ system, make
sure that you have installed it in the Corporate or Workgroup mode. This
is discussed on page 177.
Install Outlook 2000 to Corporate or Workgroup mode.
Install Outlook 2000 from the Outlook 2000 or Office 2000 CD. During
installation, you will be prompted to choose a mode (Internet Only vs.
Corporate or Workgroup), Make sure you choose the Corporate or
Workgroup mode.