Altigen AltiWare OE 4.0, Administration Manual

Page: 104 / 238

Extension and Workgroup Configuration
94 AltiWare OE System Administration Manual
• Receiver Gain/Transmission Attenuation—incoming and outgoing
volume for every extension.
— Receiver Gain—the gain control for volume received in decibels
(dB). The default setting 0 dB gain.
— Transmission Attenuation—the gain control for volume
transmitted in decibels (dB). The default setting is 0 dB gain.
Use caution in setting the Receiver Gain or the
Transmission Attenuation. If either setting is too high, the
result will be distortion in voice quality.
Triton Analog Line Properties
If you select a Triton Analog Station Board extension and click the Line
Properties button, you’ll see the Whitney Line Properties dialog box. Note
that you can use the Apply to… button to apply these hardware settings to
one, some, or all ports on the board. Using Apply to… is discussed on page
86.
You can also access this window by double-clicking a span in Channel
Mapping List of the Triton Analog Station Board configuration window.
Figure 37. Whitney Line Properties window