11
en
C
Fuel Gauge
For machines equipped with three fuel
tanks, this gauge indicates the fuel level in
each tank.
D
Interior Work
Light
Turns the interior work light on or off.
E
Glow Plug
(Isuzu Only)
Isuzu Engine - Light glows when glow plugs
are hot enough to start engine.
Heater Controls
The heater controls are located under the heater control
access door on the right side of the machine. Each heater
has its own controls.
Compare Figure 8 with the table following.
A
B
Figure 8
A
Heater LCD
Display
Displays information on the heater. See
LCD Display
.
B
Heater Start
Button
Starts the heater.
LCD Display
The LCD display panel on the heater unit displays various
information regarding the heater unit and its performance.
Each heater unit has its own display. The display will illumi-
nate when the heater unit power switch is turned on.
Compare Figure 9 with the table following.
A
B
C
D
E
F
G
H
Figure 9
A
Barometer
Barometric pressure in millibars
B
Ambient
Temperature
Actual (unheated) air temperature in
degrees Fahrenheit
C
Damper Setting
Number damper should be set to for
maximum efficiency. See
Damper
Control
.
D
Heater Operating
Status
- “START”: Heater unit is off; press Heater
Start Button to start heater unit
- “STOP”: Heater unit is on; press Heater
Start Button to turn heater unit off
E
Heater Efficiency Efficiency of heater unit in percentage
F
Target
Temperature
Target temperature of heater outlet in
degrees Fahrenheit
G
Outlet
Temperature
Actual temperature of heater outlet in
degrees Fahrenheit
H
Hourmeter
Total hours on heater unit
Not
for
Reproduction
