Agilent Technologies 4294A, Programming Manual

Page: 33 / 518

Chapter 2 33
Remote Control, Overview
Saving and Reading the Program
1. Ch
apter
T
itle
2.
Rem
o
te Contro
l,
3
. Chap
ter T
itle
4
. Chap
te
r T
itle
5. Chap
te
r T
itle
Over
vi
ew
Saving and Reading the Program
Saving the program generated
A simple saving procedure is given here. For details see “Saving a Program (SAVE)” on
page 145.
Step 1. First, connect the keyboard.
Step 2. Press the key and soft keys as given below to switch the screen.
[Display] - more 1/2 - ALLOCATION - ALL BASIC
Step 3. Select a storage unit in which to save the program.
[System] - IBASIC - more 1/3
-
MASS STORE[]
Step 4. Pressing [INTERNAL] selects a floppy disk, [MEMORY] selects a volatile memory disk
(RAM disk), or [FLASH MEMORY] selects a nonvolatile memory disk (flash memory
disk) for the storage unit.
Step 5. Press the key and soft keys as given below.
[System]
-
IBASIC - more 1/3 - SAVE
Then, the screen will look like as shown below.
SAVE ""
Step 6. Enter an optional file name with the keyboard. If a file having the same name is present in
the storage unit, the SAVE command cannot save the file. Either give another file name or
use the RE-SAVE command to overwrite the existing file.
Reading the saved file
Step 1. Press the key and soft keys as given below to switch the screen.
[Display] - more 1/2 - ALLOCATION - ALL BASIC
Step 2. Select the storage unit on which a file in view is present.
[System] - IBASIC - more 1/3
-
MASS STORE[]
Step 3. Press the key and soft keys as given below.
[System] - IBASIC - more 1/3 - GET
Step 4. Enter the name of the file in view with the keyboard.
Step 5. If you are not sure of your file name, use the CAT command to list files and then look up
the file name.