manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 88

88

DECO STOP ALT 3, information includes (Fig. 80) -

>  Time of Day (hr:min)

>  Graphic Am or Pm, if set for 12 Hour Format

>  Temperature with degrees icon and graphic F (or C)

  The display will revert to the MAIN Display after 5 seconds if

    A is not pressed.

  Press/release the A (Top) button (< 2 sec) to revert to the

    MAIN display.

NOTE:  The Alternate Displays cannot be accessed during the time (10

seconds) when an Alarm is sounding.

VIOLATION MODES

While in Violation Modes, the Alternate Displays can be accessed using the A (Top)

button, the Backlight can be toggled using the S (Side) button, Alarms can be acknowl-

edged and silenced with the A (Top) button, and the Backlight Level can be set (refer to

page 82).

  Alternate Displays will be similar to the DECO screens and are not repeated here.

They revert to the MAIN (Default) Display after 5 seconds unless A is pressed.

Fig. 80  - DECO STOP ALT 3

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands