manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 114

114

  Pressing the A (Top) button momentarily (< 2 sec) will accept the

    setting indicated by the Set Point becoming solid.

  Depressing the A (Top) button for 2 seconds, or if no button is pressed during a

period of 2 minutes, will revert to the FREE SURF MAIN screen.

FREE DIVE DEPTH ALARMS (FDA)

The CompuMask features 3 FREE Dive DEPTH Alarms that can be Set at progressively

deeper Depths and turned OFF/ON.

>  If Alarm 1 is set OFF, then Alarms 2 and 3 will be disabled.

>  If Alarm 2 is set OFF, Alarm 3 will be disabled.

When each of the Depths set are reached during a dive, 3 short beeps will sound 3 times

and the Current Depth value will flash on the MAIN Dive display.

  Pressing the A (Top) button momentarily (< 2 seconds) while the SET FREE EDT ALARM

screen is displayed will access SET FDA 1 with the ON/OFF Set Point flashing.

SET FDA 1, information includes (Fig. 101) -

>  Depth Alarm value with FT (or M) and MAX icons

>  Graphic FdA1 (meaning FREE Depth Alarm 1)

>  Set Point ON or OFF, flashing

  Pressing and releasing the S (Side) button momentarily

    (< 2 seconds) will toggle the Set Point between ON and OFF.

Fig. 101  - SET FDA 1

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands