manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 104

104

Fig. 93 - GAU DIVE ALT 1

At any time during the dive -

  Press the S (Side) button to toggle the Backlight.

  Depress the S (Side) button for 2 seconds to access Set

Backlight Level.  Refer to page 82.

  Depress the A (Top) button for 2 seconds to acknowledge

and silence Alarms.

  Press and release the A (Top) button momentarily (< 2

seconds each time) to access Alternate Displays.

GAU DIVE MAIN, information provided includes (Fig. 92) -

>  Current Depth with FT (or M) icon

>  Link icon, if a TRTR is active and linked, flashing after 1

minute of Lost Link

>  ATR (decrements of 1 min), if =< 60 min

>  Graphic GAU (indicating operation is set for Gauge Mode

  Press/release the A (Top) button (< 2 sec) to view ALT 1

GAU DIVE ALT 1, information includes (Fig. 93)

>  Max Depth with FT (or M) and MAX icons

>  Elapsed Dive Time (hr:min) with EDT icon

>  Tank Pressure with the PSI (or BAR) and Link icons, if a TRTR

is active and linked, flashing after 1 minute of Lost Link

  Press/release the A (Top) button (< 2 sec) to view ALT 2

>  The display will revert to the GAU DIVE MAIN screen after

5 seconds unless A is pressed.

Fig. 92 - GAU DIVE MAIN

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands