manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 124

124

UPLOADING SETTINGS AND DOWNLOADING DATA

The CompuMask is configured with a Data Port located on the

inner/right side (Fig. 112a) that enables it to be connected to a

PC USB port using the ACI Cable (Fig. 113).

A USB Driver is provided on the ACI CD as part of the ACI

(AERIS Computer Interface) System.

The Settings Upload feature can be used to set/change the

CompuMask’s Set G group (Backlight), Set A group (Alarms),

Set U group (Utilities), and Set T group (Date/Time) using the

ACI System.

The Set F group (FO2) and FREE Dive Mode Alarms must be

entered using the Mask's control buttons.

Information available for retrieval (DownLoad) from the

CompuMask to the ACI PC program includes Dive Number,

Surface Interval time, Maximum Depth, Elapsed Dive Time, Start

Date, Start Time, Lowest Temperature underwater, Sampling

Rate, Dive Profile, Set Points, Pressure, Air Time Remaining,

OTU, OTS, Ascent Rate, TLBG, and O2BG.

Fig. 112  - DATA PORT

a

Fig. 113  - PC INTERFACE

CABLE

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands