manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 102

102

GAUGE MODE

When Gauge Mode (GAU) is selected as the Operating Mode, the CompuMask will

operate as a Digital Depth Gauge/Timer without performing nitrogen and oxygen calcula-

tions.  Tank Pressure and ATR (Air Time Remaining) will be displayed.

  To access the GAU SURF MAIN screen while NOR SURF MAIN is displayed, depress

the A (Top) button for 4 seconds.

  To select GAU as the Operating Mode to be used, press/release the A (Top) button

while the graphic GAU is flashing.  GAU stops flashing and GAU Mode is selected.

  If no GAU dive has be conducted, depress the A (Top) button for 4 seconds to access

the FRE SURF MAIN screen.

NOR SURF MAIN > GAU SURF MAIN > FRE SURF MAIN

GAU SURF MAIN, information includes (Fig. 90) -

>  Battery icon (shell with lid), if a CompuMask Low Battery

    Warning Condition exists, flashing if Too Low.

>  Surface Interval (hr:min) with SI icon.

>  Tank Pressure with PSI (or BAR) and Link icons, if

    the Receiver is successfully Linked with an active Transmitter.

>  Dive Number (lower/left)

>  Graphic GAU (indicating Gauge Mode).

  Press the S (Side) button to toggle the Backlight.

  Press/release the A (Top) button as necessary to access SURF

    ALT, FLY, LOG, and HISTORY, similar to NOR Mode.

Fig. 90 - GAU SURF MAIN

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands