manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 128

128

If there is any sign of moisture in the Mask's Optics, DO NOT attempt to use the Mask until

it receives proper service.

Prior to each dive operation, the Mask should be activated and Battery status, Button

operations, Backlight operation, and Set Points verified and/or modified, if required.  The

Transmitter should be pressurized and transmitted data verified to be properly received by

the Mask it is linked to.

Your  CompuMask should be inspected annually by an Authorized AERIS Dealer who will

perform a factory prescribed function check and inspection for damage or wear.  To keep

the 2 year limited warranty in effect, this inspection must be completed one year after

purchase (+/- 30 days).

AERIS recommends that you continue to have an inspection performed every year to

ensure it is working properly.

The costs of annual inspections are not covered under the terms of the 2 year limited

warranty.

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands