manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 76

76

ASCENT RATE ALARM

Alarms associated with Ascent Rate are based upon 2 sets of

speeds which change at a reference depth of 60 FT (18 M).

The Audible will sound and the graphic SLO will flash in place

of DTR (Fig. 65).  The Audible will stop when acknowledged by

pressing and releasing the A (Top) button, or after 10 seconds,

or when the Ascent is slowed.  The graphic will continue to flash

until Ascent is slowed, then DTR (hr:min) will reappear.

WARNING:  At depths greater than 60 FT (18 M),

Ascent Rates should not exceed 60 FPM (18

MPM).  At depths of 60 FT (18 M) and shallower,

Rates should not exceed 30 FPM (9 MPM).

TANK PRESSURE ALARMS

Alarms associated with Pressure are set prior to dives utilizing

the NOR/GAU Set A menu selections.

The Audible will sound and the graphic trn then End will flash

in place of DTR (Fig. 66A/B).  The Audible will stop when

acknowledged by pressing and releasing the A (Top) button, or

after 10 seconds.  The graphic(s) will flash for 10 seconds, then

DTR (hr:min) will reappear.

Fig. 65  - ASCENT RATE

ALARM

Fig. 66B  - END PRESSURE

ALARM

Fig. 66A  - TURN PRESSURE

ALARM

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands