manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 27

27

The CompuMask will enter Post Dive Surface Mode following a

dive upon Ascent to 4 FT (1.2 M) for 1 second.  The Surface

Interval Time colon will flash during the first 10 minutes after a

NOR/GAU dive, or first 1 minute after a FRE dive, indicating a

Descent will be a continuation of that dive.

During the first 2 hours after a dive, the SURF MAIN screen for

the Operating Mode selected prior to the dive (NOR, GAU, or

FRE) remains on display as the Default SURF MAIN screen.

NOR SURF MAIN, information includes (Fig. 15A/B):

>  TLBG (Left Bar with TL icon), and accumulated segments if

any after a NOR or FRE dive.

>  Battery icon (shell with lid), if a CompuMask Low Battery

Condition exists, flashing if Too Low.

>  Surface Interval (hr:min) with SI icon.

>  Tank Pressure with PSI (or BAR) and Link (Speaker) icons, if

the Receiver is successfully Linked with an active

Transmitter.

>  Nx icon, if FO2 is set for a Nitrox (numerical value).

>  Dive Number (lower/left).

>  Graphic Nor (indicating Normal Mode).

Fig. 15B - NOR SURF MAIN

(12 min after dive #1)

Fig. 15A - NOR SURF MAIN

(no dive made yet)

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands