manualshive.com logo in svg

Aeris CompuMask, Operating Manual

Share
Download
Aeris CompuMask Operating Manual Download Page 60

60

TIME TO FLY, information includes (Fig. 47):

>  Graphic FLY

>  Countdown Time (hr:min).

>  Battery icon (shell with lid), if a CompuMask Low Battery

Condition exists, flashing if Too Low.

  Pressing and releasing the A (Top) button momentarily (< 2

    seconds) will access the SAT screen.

  The display will revert to the NOR SURF MAIN screen after 2

    minutes of no button action.

  Pressing the S (Side) button will toggle the Backlight.

SAT MODE

The Time to Desaturate counter provides calculated time for Tissue Desatuation at sea level

taking into consideration the Conservation Factor setting.  It begins counting down 10

minutes after surfacing from a dive, counting down from 23:50 max to 0:00 (hr:min).

When the Countdown reaches 0:00, which will generally occur prior to the FLY count-

down reaching 0:00, the SAT screen continues to alternate with FLY displaying 0:00 until

the FLY counter shuts the CompuMask Off 24 hours after a last dive.

>  The SAT screen is not displayed after a Violation Dive.

>  Desaturation requiring Times greater than 24 hours will display 23: - - .

>  In the event that Time to Desaturate still remains at the end of 24 hours, the added

time will be zeroed.

Fig. 47  - time to fly

Summary of Contents for CompuMask






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands